DIAMOND-SHAPED PE YARN · FOOTBALL TURF

Diamond-Shaped PE Yarn Football Turf

Specify 50 mm football turf made with Diamond-shaped PE yarn: 15,000 dtex / 6F and a pile weight of 1,600 g/m². For high-use pitches, review the turf together with its infill, shock pad and reported performance after simulated wear.

Melody Grass’s supplied Labosport test summary reports measurements before and after 6,005 LISPORT XL simulated-wear cycles for the specific 50 mm Diamond-shaped PE yarn turf system described below.

Report LSA-R24465-A1 · 25 October 2024

Melody Grass Diamond-shaped PE yarn football turf sales one-pager summarising the tested system and before-and-after wear results
View the full sales one-pager
Summary sheet; full test report available on request.

BEFORE AND AFTER SIMULATED WEAR

What changed after 6,005 cycles?

The reported results show the change in three measurements for the tested configuration. Changes are shown as measurements, without treating an increase or decrease as a general performance improvement.

Reported measurement Before wear · dry After 6,005 cycles
Shock absorption 61.7% 60.1%
Ball roll 5.7 m 9.9 m
Ball rebound 0.74 m 0.97 m

Source: the supplied Melody Grass football turf sales one-pager, citing Labosport report LSA-R24465-A1. The initial values are labelled “before wear — dry”; the comparison values are labelled “after 6,005 cycles”. Request the full report for methods, conditions and scope.

THE TURF IN THE TESTED SYSTEM

50 mm Diamond-shaped PE yarn football turf

Pile height
50 mm
Yarn
Diamond-shaped PE yarn · 15,000 dtex / 6F
Pile weight
1,600 g/m²
Free fibre height
20 mm in the tested configuration

The 20 mm free fibre height refers to the tested configuration. Confirm the finished system, infill and installation specification together when preparing your order.

SYSTEM CONFIGURATION

The infill and shock pad are part of the evidence

The sales one-pager describes the following components alongside the tested turf. The reported results apply to this configuration; they should not be transferred automatically to different infill, shock pads or turf specifications.

Silica sand

25 kg/m²

Infill quantity in the tested system.

EPDM infill

9 kg/m²

Infill quantity in the tested system.

Shock pad

10 mm

LDPE (XPE), as described in the supplied summary.

PROJECT APPLICATIONS

Discuss a system for your intended use

This configuration is positioned for training grounds, football academies, schools, community pitches and commercial football centres. Share the usage schedule and project requirements so the proposed supply can be reviewed against your brief.

Clubs & academies

Provide the planned training schedule, player groups and maintenance arrangements.

Schools & communities

Describe shared activities, site conditions and any procurement requirements.

Contractors & operators

Send drawings, quantities and the specified turf, infill and shock-pad requirements.

Turn the test summary into a project specification

  1. Request the full Labosport report and confirm the tested sample and configuration.
  2. Compare your proposed turf, sand, EPDM and shock pad against that configuration.
  3. Agree project-specific performance criteria and any required laboratory or site testing.
  4. Confirm the base, drainage, installation and maintenance plan with the project team.
  5. Obtain a quotation that identifies each supplied component and any exclusions.

LISPORT XL cycles describe simulated laboratory wear, not a stated number of service years. This summary is not presented as FIFA certification or as verification of a completed pitch.

Request the report and a football turf system quotation

Send the pitch dimensions or area, destination, expected usage, project timing and any tender specification. Tell us whether you need turf only or the specified infill and shock-pad system.

Related products: Football Grass · Grass Accessories